The STIHL cordless tools are so quiet you don't even need to wear ear protection.
Neutral battery position
The battery can be inserted into the tool in 2 stages. In the first neutral position, the battery is secured in the tool but does not connect with the contacts, allowing for safe transport. In the second operating position, the battery is completely inserted allowing for full operation of the tool.
Blade tip protector
The tip protector comes fitted as standard and makes cutting near the ground or along walls easier, whilst helping to protect the cutters from damage.
Double sided cutting blades
STIHL hedge trimmers with double-sided cutting blades cut both vertically and horizontally.
Two handed design
The tool is easily started by activating both switches on the loop handle and the rear handle at the same time. The cutting speed is continuously variable using the rear control, for a fine and precise cut. The two handed design is suitable for both left and right-handed users.
The hedge trimmers can be conveniently hung up on the wall with the hanging eye.
Stroke rate rpm 2.800
Rated voltage V 36
Run time with AK 10 battery min 1) up to 50
Run time with AK 20 battery min 2) up to 100
Total length cm 94
Sound power level dB(A) 3) 91
Sound pressure level dB(A) 4) 80
Vibration value, left m/s2 5) 2.7
Vibration value, right m/s2 5) 1.2
Blade length cm 450mm/18"
Cutting capacity mm 23
- Battery life times are approximate and may vary depending on application
- Run times may vary depending on the application
- K-factor according to DIR 2006/42/EC = 2.5 dB (A)
- K-factor according to DIR 2006/42/EC = 2.5 (dB (A))
- K-factor according to DIR 2006/42/EC = 2m / s ²